• Item Name: LED PL-C

• Item No.: AH-PLC-4W1204D

• Power Consumption:  4W

• LED Chip Brand: EPISTAR

• Typical Color Temperature: 3000K/ 4000K/ 6000K

• Typical Lamp Luminous Flux:3000K：360Lm/ 4000K：380Lm/ 6000K：410Lm

• CRI :3000K：Ra>80/ 4000K ：Ra>80/ 6000K ：Ra>80

• Beam Angle: 130°

• Input Voltage:AC110V/60Hz AC220V/50Hz

• IP Code: IP40

• Operating Temperature : （-20℃~+40℃）

• Operating Environment:10%~90%RH

• Base: G24/E27

• Life Time: 30,000Hrs

• Replacement: Substitute for 5 inch traditional PL-C

• Color consistency high, low-power, low-light decline, long lifespan, good brightness.

• Highly constant current drive, which can extend the LED lifespan.

• Use RoHS aluminum to solve the LED heat transfering problem so that the lamp can keep in good working condition.

• No UV or IR radiation, Environment friendly.

• CE, RoHS, FCC,  approved.

• Lampbase option of  G24;

• Easy installtion with high safety;

• Rotatable lamp cap,more flexible turning

• Flicker Free, Quiet Operation, Direct Replacement

• Low Initial Cost ,Extended Lamp Life,High Investment Return

• Innovative and unique design.

• Universal base (E27 or G24), direct replacement for traditional PLC lamp. 

• Much more safe,  vibration  and  impact  resistant;  no  UV  and  reduce  IR radiation

• Instant start, no flickering, no humming 

• New inner high efficiency (90%) constant current driver, with heat protection system, can work under unstable voltage  Electric wave resistant

• No hazard of mercury or lead entering the environment

• Innovative and patented design

• Much more safe,  vibration  and  impact  resistant;  no  UV  and  reduce  IR radiation

• Much more environmentally friendly, contain no mercury or toxic and flammabe gases; last longer and produces less waste; and they are made from full recyclable materials

• Solid state, high shock/vibration resistant

• Work without ballast, instant self-start

• Quick and easy installation to minimize retrofit costs

I. New installation
1. Make sure the power is cut off, connecting the LED PL-C lamp and power switch into circuit, as the wiring diagram below:
2. Unpacking the AWARD^? LED PL-C and install into the G24d-1 lamp holder, check the wiring connections. Please note that it is no need to distinguish the positive and negative poles when install the AWARD^?  LED PL-C into the fixture.
3. Rotate the AWARD^?  LED PL-C slightly, keep the light-emitting area stay consistent with the light-out surface of the lamp.
4. Confirm connecting then electrify to test function,
      
II. Replacement installation
1. Please make sure your LED PL-C lamp is in electronic rectifier circuit or inductive rectifier circuit. If in inductive rectifier circuits LED PL-C lamp, then can completely replace the traditional PL-C lighting without remove the inductive rectifier and the starter.
2. In order to improve the efficiency of power consumption and achieved better performance. It is recommended to transform the circuit by professional and technical personnel as the wiring diagram below:
3. To continue the step 2 and step 3 as described in the new installation.






 

• Hotels, entertainment places

• Exhibitions, fashionable dress acts

• Saloon, coffee houses, photography areas

• High-class stores, shopping malls

• Popular used in shopping malls, meeting rooms, exhibitions, residential lighting and more

• It used as down-light in shopping malls, hotels, residential apartments and lift lobbies.
  It has advanced integral high frequency LEDs with new high efficiency fluorescent tubes that reduces energy consumption by up to 50% whilst maintaining light brightness. In addition, tube life is extended…
  
  
  

• Your inquiry related to our products or prices will be replied within 24hrs.

• Well-trained and experienced staffs to help you locate the products in your best interest.

• OEM & ODM production available.

• 2 year warranty.

• Protection of your sales area, design and all your private information, if any.

• Ideal for a variety of applications

• Ideal for common offices and facilities

• High light intensity, ideal for shops and factories with high ceilings

Low power consumption, ideal for parking and warehouses